Floor Deck Roll Forming Machine

Full utilization of material Unique metal surface protection High precision in forming and cutting CE Certification

Model:75-200-600 metal Floor deck roll forming Machine 

panel pattern:

Type	60-211-845			Application
Effective Width (mm)	845
Feeding Width (mm)	1000			Large-span Wall Panel
Thickness (mm	0.6	0.8	1.0
Section Inertia (cm4/m)	18.92	26.28	32.98
Section Resistance (cm3/m)	10.68	14.02	17.28

1: Configuration

 Uncoiler 1 set

 Roll forming roller: 11-18 groups

 PLC control system 1 set

Hydraulic cutting system: 1 set

Collection table

 

2: Working Process Flow:

Uncoiling-Coil feeding-Guiding-Roll Forming-Punching (if needed) - Cutting-Collection table

 

3: Technical Parameters: 

 

A: Power supply:

380V, 3 phases, 50 Hz (can be adjusted according to actual power supply conditions in different countries)

Main motor power: 18.5KW

Pump power: 5.5kw

 

B:Uncoiler:

Inner diameter: 500mm

Outer diameter: 1100mm loading weight: 5t

 

C:Forming part: 

Feeding thickness: 0.8-1.3mm

Feeding width: 1000mm

Forming speed: 10m/min

Cutting Deviation: 10m±2mm

No. of Roller station: 24 groups

Roller material: Cr12

Material of shaft: 45# steel with heat treatment

Diameter of shaft: 72-90mm

 

D:Hydraulic System:

Hydraulic pressure: 13-16 Mpa

Cutter material: Cr12

E:Control system:

Full-automatic NC-PLC control system

Control channel: Colored touch screen

F: Size of Machine

Side panel thickness: 22mm

Overall Size: 13000×2000×1550mm

Total Weight: 12T

. 

Steel floor plate is of simple shapes, high wave-degree and high strength. When installed, it can be directly mixed with the welded steel mesh and concrete with good adhesion, Applied in high-rise steel buildings, it can save the steel molding templates, and also reduce the floor load. Under the same load capacity, it can reduce the amount of steel to achieve cost-saving.

Features and application: It produced steel floor board for the floor panel of high rise building, with high wave crest and strength, high degree of automation and low cost.

Floor Deck Roll Forming Machine